Clear Communication for Kenwood Two-Way Radios, Even in High Noise

    If you use a Kenwood two-way radio in a noisy environment, such as riding, security details, event operations, or industrial sites, a standard speaker mic quickly gets drowned out. The IASUS NT5 throat microphone solves that by picking up your voice directly from vocal cord vibration instead of the air around you. No wind, engine noise, or crowd noise in the way. Just clear transmission.

    This page covers which NT5 configuration fits your Kenwood radio, how to set it up, and what else you need to get on the air.

    Which Throat Mic Works With Kenwood Radios?

    The NT5, Kenwood and BaoFeng Dual Pin ($197.25) is the direct match for Kenwood radios with the standard 2-pin (K-type) audio accessory connector. This is the most common Kenwood portable connector, and it is shared with Baofeng and BTECH radios, which is why the product covers both.

    Throat Mic for Kenwood or Baofeng Radios

    What’s in the box: NT5 throat mic headset, throat strap (fits 13 to 21 inch necks), and the Kenwood/BaoFeng dual pin M2 adaptor with button, compatible with wired PTT accessories.

    Kenwood Radios the NT5 Works With

    Kenwood portables use several accessory connectors, so compatibility depends on your specific model:

    • TK/TH series (TK-2300, TK-3300, etc.): standard 2-pin K connector, use the NT5 Kenwood/BaoFeng Dual Pin directly.

    Don’t see your model? Check the full Throat Mic Compatibility page or contact us and we’ll confirm the right setup.

    How to Set Up Your NT5 With a Kenwood Radio

    1. Connect the dual pin adaptor to your radio’s accessory port.
    2. Fit the throat strap comfortably around your neck so the transponder sit softly against your skin.
    3. Position the transducers on your voice box (where vibrations are strongest) and adjust until volume and clarity peak. Placement varies by person.
    4. Use the inline PTT button to transmit or PTT on the radio. Some Kenwood models need the audio accessory mode enabled in the radio menu first.

    For more detail, see How to Use a Throat Microphone.

    What Else Do You Need?

    The NT5 comes by itself, but the Kenwood/Baofeng combo comes with the dual pin adapter. The NT5 ships with everything needed to transmit: strap, adaptor, and an inline PTT button. There are optional earpieces you can choose from:

    And add an optional extended Finger PTT ($25)

    If your team uses push-to-talk apps like Zello or ESChat instead of radios, see our BLE Wireless PTT for PoC setups.

    FAQ

    Will this throat mic work with my Kenwood TK-3300?
    If your radio uses the standard 2-pin K connector, yes. The NT5 Kenwood/BaoFeng Dual Pin plugs straight in.

    Does it work with Baofeng radios too?
    Yes. Baofeng and BTECH use the same 2-pin connector, so the same NT5 configuration covers both. Please check your unit though to confirm.

    Do I need anything else to use it?
    No. The NT5 and Kenwood dual pin combo ships with the strap and adaptor inline PTT button. Add an acoustic coil earpiece, earbuds or helmet speakers if you need to hear incoming audio.

    Shop Other Radio Brands

    Using a different radio? See the throat mic guide for your brand:

    Still Not Sure Which Kenwood Setup You Need?

    Check the full Throat Mic Compatibility page, or contact us and we’ll confirm the right configuration before you order.