Clear Communication for Sonim Two-Way Radios, Even in High Noise

    If you use a Sonim rugged phone or two-way radio in a noisy environment, such as construction, security details, event operations, or industrial sites, a standard speaker mic quickly gets drowned out. The IASUS NT5 throat microphone solves that by picking up your voice directly from vocal cord vibration instead of the air around you. No wind, engine noise, or crowd noise in the way. Just clear transmission.

    This page covers which NT5 configuration fits your Sonim device, how to set it up, and what else you need to get on the air.

    Which Throat Mic Works With Sonim Devices?

    The NT5, Sonim Pin (contact us for pricing) is the direct match for Sonim rugged handhelds with the Sonim accessory connector. It covers the XP8 and XP5.

    Throat Mic for Sonim Devices

    What’s in the box: NT5 throat mic headset, throat strap (fits 13 to 21 inch necks), and the Sonim M2 adaptor with button, compatible with wired PTT accessories.

    Sonim Devices the NT5 Works With

    Sonim rugged handhelds use the Sonim accessory connector across their lineup:

    • XP8: use the NT5 Sonim Pin directly.
    • XP5: use the NT5 Sonim Pin directly.

    Don’t see your model? Check the full Sonim Headset Compatibility page or contact us and we’ll confirm the right setup.

    How to Set Up Your NT5 With a Sonim Device

    1. Connect the Sonim adaptor to your device’s accessory port.
    2. Fit the throat strap comfortably around your neck so the transponders sit softly against your skin.
    3. Position the transducers on your voice box (where vibrations are strongest) and adjust until volume and clarity peak. Placement varies by person.
    4. Use the inline PTT button to transmit or PTT on the device. Some Sonim models need the audio accessory mode enabled in the settings first.

    For more detail, see How to Use a Throat Microphone.

    What Else Do You Need?

    The NT5 Sonim Pin ships with everything needed to transmit: strap, adaptor, and an inline PTT button. There are optional earpieces you can choose from:

    And add an optional extended Finger PTT ($25)

    If your team uses push-to-talk apps like Zello or ESChat instead of radios, see our BLE Wireless PTT for PoC setups.

    FAQ

    Will this throat mic work with my Sonim XP8?
    Yes. The XP8 uses the Sonim accessory connector, so the NT5 Sonim Pin plugs straight in. Please check your unit though to confirm.

    Does it work with the XP5 too?
    Yes. The XP5 uses the same connector, so the same NT5 configuration covers both.

    Do I need anything else to use it?
    No. The NT5 Sonim Pin ships with the strap, adaptor, and inline PTT button. Add an acoustic coil earpiece, earbuds or helmet speakers if you need to hear incoming audio.

    Shop Other Radio Brands

    Using a different radio? See the throat mic guide for your brand:

    Still Not Sure Which Sonim Setup You Need?

    Check the full Sonim Headset Compatibility page, or contact us and we’ll confirm the right configuration before you order.